.jpg)
Actual colour may vary from on-screen representation.
Valspar® Cabinet & Furniture Oil-Enriched Enamel
Valspar® Cabinet and Furniture Paint dries to a smooth factory-like finish and stands up to daily use leaving a fade-, scratch-, and scuff resistant finish. Most projects will require little-to-no prep work. The oil-enriched formula provides exceptional durability with no brush marks.
Paint Sheen Comparison
Available sheens for this product
Flat
Master Bedrooms · Formal Dining Rooms
Non-reflective finish ideal for low-traffic areas.
Satin
Kitchens · Bathrooms · Kid's Spaces
Soft lustre that can be scrubbed clean; ideal for high-traffic areas and moisture-prone rooms.
Semi-gloss
Kitchens · Bathrooms · Doors & Trim · Kid's Spaces
Shiny, mildly reflective sheen with high durability
Satin
857 - 946 mL / 1 Quart
3.78 L / 1 Gallon
HOW TO USE
-
UsageBare wood, previously painted wood or metal in sound condition, and properly prepared laminate.
-
PrepPreviously Painted Surfaces and Bare Wood: Thoroughly clean the surface and allow to dry. Remove all dirt, dust, chalk, rust, grease, wax and mildew. Scrape off loose and peeling paint. Dull glossy surfaces by sanding. Laminate: Apply a coat of bonding primer. Bare Metal: Apply a rust-inhibitive metal primer.
-
ApplicationStir paint thoroughly. Intermix containers to ensure uniform colour. Apply with a premium-quality roller or polyester brush. Note: Two thin coats are required. Bare wood and some deep or bright colours may require an additional coat to obtain complete hide. Surface conditions and application technique can also impact coverage. Allow to dry thoroughly before recoating or use.
-
Dry TimeDry Time @ 25 °C (77 °F) and 50 % Relative HumidityTo The Touch: 4 hour 4 hourRecoat: 8 hour - 12 hour
-
Clean-up & DisposalClean up with warm, soapy water. If product has fully dried, you may need mineral spirits.
Data Sheets
Download the product data sheet (PDS) and safety data sheet (SDS) for your Valspar cabinet furniture oil-enriched enamel.
