HOW TO USE

• Usage
  This paint is ideal for use on walls, ceilings and trim. It applies easily to properly prepared and primed plaster, wallboard, wood, brick, masonry and metal.
• Prep
  Thoroughly clean the surface and allow to dry. Remove wallpaper and loose, peeling paint. Remove gloss from shiny surfaces. Patch cracks and spot prime. Valspar® Colour Sample paint can be used to prime patched areas and bare surfaces before applying the finish coat. For best results on heavily stained areas, drastic colour changes or deep, vivid colours, prime with Valspar® Interior Multi-Purpose Primer/Sealer for optimal colour accuracy and coverage.
• Application
  Stir paint thoroughly. Intermix containers to ensure uniform colour. Apply with a premium-quality roller, polyester brush or airless sprayer. Paint the ceiling first, then the walls. If applying by roller, roll from dry area into wet area using firm, crisscross strokes. Finish with long, even strokes in one direction. Note: Some deep or bright colours may require an additional coat to obtain complete hide. Surface conditions and application technique can also impact coverage.
• Dry Time
  Dry Time @ 25 °C (77 °F) and 50 % Relative Humidity
  To The Touch: 30 minute - 1 hour
  Recoat: 2 hour
• Clean-up & Disposal
  Clean up with warm, soapy water.